Key figures (citable)
| Item | Indicative |
|---|---|
| Channel for this port | Re-stuffing |
| Transhipment / de-stuffing port | Surabaya (Tanjung Perak) |
| Delivery form | B1/B2 · smaller boxes or LCL |
| Domestic leg (excl. waiting) | 15–25 |
| Base-port handling | About 3–5 working days (clearance, haulage, de-stuff, tally, re-load; extended if inspected) |
| Domestic door-to-door leg (from transhipment / de-stuffing port) | Sumatra 5–10 days | Kalimantan 7–12 | Sulawesi 4–7 | Bali & Nusa Tenggara 5–12 | Maluku 12–18 | Papua 15–25 |
| Waiting on low-frequency services | Add about 7–10 days (Papua and Maluku); further extended in the December–February swell season |
| Last reviewed | 2026-09-28 |
What this port is
An outer island north of Papua: project and household supplies.
How this port actually works
It moves through the re-stuffing channel, remote and low-frequency: de-stuffed and re-loaded at Surabaya then carried north on the domestic leg, with both waiting for sailings and the swell season in the plan. Project cargo dominates, so the container type follows what the destination can handle.
Typical cargo
- Government project cargo
- Building materials
- Consumer goods
What bites at this port
Remote and low-frequency, and the wave season stretches it further — allow a generous planning window.
Why some minor ports have to be re-stuffed
- Draught gate: minor ports commonly sit at 5–7 m, reachable only by feeder vessels below a thousand boxes — an international mother vessel can never call direct
- 40 ft high cubes often cannot be discharged: berths are feeder berths with no gantry crane, worked by ship's gear or mobile cranes. Indonesian domestic lines take both 20 ft and 40 ft — stepping down to 20 ft only works around a port's lifting or weight limit, it is not because 40 ft is unavailable
- Some ports are not container ports at all: no gantry, no rubber-tyred gantry, no reach stacker — quoting container rates there guarantees a loss
- One box often has to reach several consignees: a carrier through bill cannot do that, re-stuffing supports it by design
Questions we are asked, and our standard answers
Can you issue one bill of lading through to port X?
We check the carrier network first. If the port is covered, we issue a through bill. If not, we say so plainly and immediately offer the re-stuffing route instead.
Why do you open my container?
Not because we want to — the destination’s draft and crane capability cannot take a large box. Re-forming the cargo into what the port can actually handle is how the cargo gets landed at all.
Will de-stuffing cause loss or damage?
We photograph before and after de-stuffing, tally throughout, and recommend insurance against cargo value. Responsibility boundaries are written into the mandate.
How long will it take?
We quote in three legs: mainline, base-port handling, domestic leg — plus waiting time on low-frequency routes. We do not commit to a single figure.
Can small lots move?
Yes. LCL is charged on volume or weight; above roughly 4–5 CBM or 2.3 tonnes a 20 ft box is cheaper, and we will run that comparison for you.
How is the price built?
Passed through at the carrier’s current tariff, itemised: base-port clearance, de-stuff and tally, re-load, storage, domestic sea leg, destination port charges, final delivery and tax. We do not quote fixed prices.
What must be confirmed first at Biak?
Remote and low-frequency, and the wave season stretches it further — allow a generous planning window.
How does Biak actually work?
It moves through the re-stuffing channel, remote and low-frequency: de-stuffed and re-loaded at Surabaya then carried north on the domestic leg, with both waiting for sailings and the swell season in the plan. Project cargo dominates, so the container type follows what the destination can handle.
What cargo typically ships to Biak?
Government project cargo, Building materials, Consumer goods
Official sources
The channels below can be checked independently. Rates, regulatory conditions and handling times follow the latest publications of each authority.
- Pelindo (Indonesia Port Corporation) — Port operations, terminals and vessel movements · pelindo.co.id
- Indonesia National Single Window (INSW) — Unified platform for import/export filing, permits and documents · insw.go.id
- Ministry of Transportation (Kementerian Perhubungan) — Domestic shipping and port regulations · dephub.go.id
Next step
Send us the destination port and a cargo description (commodity, piece count, weight and dimensions per piece). We will tell you whether it moves on a carrier through bill or by re-stuffing at a base port, and hand you an executable capacity plan with the pricing items.
Get a minor-port capacity plan